Difference Between Vitrified Tiles and Porcelain Tiles

Main difference

The main difference between vitrified tiles and porcelain tiles is that vitrified tiles are very low porosity ceramic tiles, while porcelain tiles are made from more refined clay and are fired at high temperatures.

Vitrified Tile vs. Porcelain Tile

Vitrified tiles are made with marble, rock and art, these tiles are equally a good choice; On the other hand, due to the body layout of porcelain tiles, they are considered to be more and more resistant and more suitable for overwhelming use than artistic tiles. Vitrified tiles will make your whole house look much brighter compared to tile, and less smart or matte finished tiles, on the other hand, porcelain tile cementitious grout that fills the joints between tiles needs to be repaired occasionally to prepare stains and mildew.

In the consumption of vitrified tiles, some of the tiles are damaged, it must be expelled by cutting the grout lines on the sides, otherwise it will damage other tiles; on the contrary, the hardness of porcelain stoneware makes it more fragile and tough than standard tiles, so they can be progressively vulnerable to breakage. Vitrified tiles are produced by tile vitrification technique which gives the tiles a glass-like appearance and builds a homogeneous and solid material, while porcelain tiles are also called fired tiles which are further solidified to enlarge the thickness, quality and Build the impenetrable tile.

Vitrified tiles can be used in local locations and territories with high commercial traffic; On the other hand, porcelain tiles can be used in local locations and areas with average commercial traffic. Vitrified tiles are offered as soluble salt vitrified tiles, double load vitrified tiles, full body vitrified tiles and glazed vitrified tiles; On the other hand, porcelain tiles are available in two assortments of explicitly coated and unglazed porcelain tiles.

Comparison chart
glazed tiles porcelain tiles
Low porosity ceramic tiles are known as vitrified tiles. Refining clay made up porcelain tiles.
absorb water
<0.5% 3-5%
general use
Floor Floor
Plus Less

What are vitrified tiles?

The vitrified tile is a low porosity earthenware. It is an option for marble and stone floor surface. Vitrified tiles are regularly used outside due to their clogging by water and frost.

Vitrified tiles are a mixture of water that mixes with earth, quartz, feldspar and silica and forms the vitreous surface of the tiles. Consequently, making a solitary dough creates them hard with low porosity. The different terrestrial bodies reach vitrification at different temperatures. The earth is mixed with quartz and feldspar before being heated in the oven. These additional fixings soften, forming a glass component within the tile.


  • Vitrified soluble salt tiles : These soluble salt tiles are cleaned and screen printed.
  • Double Load Vitrified Tiles: These tiles are cared for by a press that prints the example with a double layer of tonality, 3 to 4 mm thicker than the different types of tiles. This procedure does not allow for complex examples, but it does produce a long-lasting tiled surface, reasonable for high-traffic commercial enterprises. Its layer is about 4 mm thick, which can weaken the quality of the tile.
  • Full Body Vitrified Tiles: These tiles have color throughout the body (thickness) of the tile. This makes chips and scratches less noticeable and makes this a perfect decision for high-traffic areas, however, the procedure essentially creates the expense.
  • Coated vitrified tiles: GVT has a coated surface. They offer a wide variety of planes, fine art and surface surfaces such as woodgrain, bamboo, disc or stone. This is also an expensive procedure, but the expense is decreasing as advanced printing strategies are introduced.
What are porcelain tiles?

Porcelain is a type of ceramic tile that is characterized by being more solid, harder and much safer for water than normal ceramic, which from now on is very solid. Porcelain tile accomplishes this by using soil with better particles finished at a higher temperature, which makes for a harder, less permeable surface than can be achieved with standard fired tile. This natural adaptability allows fired tiles to provide several advantages as a platform, for example strength and adaptability to the plane. In different cases, porcelain stoneware is more brittle to some degree or at some level. They are indistinguishable art mosaics and also have some disadvantages instead of fired mosaics only because of their overwhelming weight, under harness and coldness.

Porcelain tiles for all intents and purposes constantly receive a surface coating treatment – a cover of liquefied glass material. In history, porcelain was not the typical material for tiles, which were made much more regularly in ceramic (earthenware) or stoneware. Primary porcelain tiles were made in China, for example in the 15th century Nanjing Porcelain Tower (currently largely crushed).

Here the tiles were used for spacers, which for quite some time, remained regular. In Europe, a couple of rooms in royal residences were made from porcelain plates, often with structures in high relief. These, among others, were made with a Capodimonte porcelain and Real Fábrica del Buen Retiro. In addition, porcelain is mainly used to make durable tiles, such tiles have been widely used for a long time, current strategy regarding the creation of porcelain and its affordability rate for a normal house.

Key differences
  1. Vitrified tiles absorb less water; On the other hand, porcelain stoneware is more impermeable to water.
  2. Vitrified tiles are made from a mixture of silica and clay; On the other hand, porcelain stoneware is made with clay.
  3. Vitrified tile is a relatively new market term; on the contrary, porcelain stoneware is a vitrified form of the fired clay body.
  4. Vitrified tiles are manufactured using the water pressing strategy technique; On the other hand, porcelain stoneware is made up of the Residuos Press strategy.
  5. The vitrified tile is identified by its ability to assimilate less water (as a rule <1%); On the other hand, porcelain tiles have a water intake of less than 0.5%.
  6. Vitrified tiles have low porosity and are also stain resistant; On the contrary, porcelain tiles have a higher quality and are more resistant to damage.

Leave a Reply

Your email address will not be published. Required fields are marked *


Back to top button